1.2312, 40CrMnNiMo8-6-4 Plastic mould steel
In the DIN EN ISO 4957 the grades 1.2311 (AISI P20), 1.2312(AISI P20+S) and 1.2738 (AISI P20+Ni) covered by the above mentioned code were amalgamated. The grade 1.2312 contain additional quantities of S and no additional quantities of Ni.
1. Applications:
Plastic moulds, frames for plastic pressure dies, hydroforming tools.
2. Chemical analysis:
|
C%
|
Mn%
|
Si%
|
Cr%
|
Mo%
|
P%
|
S%
|
|
0.35~0.45
|
1.40~1.60
|
0.30~0.50
|
1.80~2.00
|
0.15~0.25
|
=<0.03
|
0.05-0.10
|
3. Steel properties:
Plastic mould steel with additional sulphur, usually supplied in a quenched and tempered condition. Polishable, better machinibility compared to 1.2311. Similar to AISI P20+S.
4. Condition of delivery:
Quenched and tempered, 950 - 1100 N/mm²
5. Physical properties:
|
Thermal expansion coefficient
|
10-6 m
|
20-100°C
|
20-200°C
|
20-300°C
|
20-400°C
|
|
m K
|
12.3
|
12.9
|
13.3
|
13.5
|
|
|
Thermal conductivity
|
W
|
20°C
|
350°C
|
|
|
|
m K
|
39.6
|
39.3
|
|
|
6. Heat treatment:
|
Soft annealing
|
Temperature
|
Cooling
|
Hardness
|
|
710 - 740°C
|
furnace
|
max. 235 HB
|
|
|
|
|||
|
Stress relief annealing
|
Temperature
|
Cooling
|
|
|
500 - 550°C
|
furnace
|
|
|
|
|
|||
|
Hardening
|
Temperature
|
Cooling
|
Tempering
|
|
830 - 870°C
|
oil or hot bath
180 - 220°C
|
see tempering
diagram
|
|
